विद्युत उपकरण परीक्षण उपकरण
आईईसी 60335-1 हाउस होल्ड एप्लायंस मैट ब्लैक पेंटेड टेम्परेचर राइज टेस्ट कॉर्नर
IEC 60335-1 House Hold Appliance Matt Black Painted Temperature Rise Test Corner Product Overview This test corner is designed and manufactured according to the "heating" test requirements in the IEC 60335-1, and it provides the required environment for the temperature rising test of household ...
IEC 60335-2-17 इलेक्ट्रिकल कंबल स्पार्क इग्निशन परीक्षण उपकरण
IEC 60335-2-17 Blanket Spark Ignition Test Apparatus Product overview: This device meets the standard of IEC 60335-2-17, Clause 30.101 Figure 113 & 113a. It is used to inspect the flexible electrical heating appliance flammability, to test whether the charged body arcing caused overheating or ...
हॉटप्लेट टेस्ट के लिए IEC60335 एल्युमिनियम वेसल्स 110mm 145mm Φ180mm Φ220mm 300mm
IEC60335 Aluminum Vessels For Hotplates Test Φ110mm Φ145mm Φ180mm Φ220mm Φ300mm Standards & Clauses: The vessel conforms to the standard requirements of IEC60335-2-9:2016 clause 3.1.9.108 & 15.2 figure 103, IEC 60335-2-6:2018 clause 15.2 figure 101, and etc. One set includes Ф110 mm, Ф145 mm, Ф180 ...
उल 60335 -2 3.5-4.5 वर्ष आयु परीक्षण जांच केंद्र के साथ उंगलियों को अनुकरण करने के लिए पिन घुमाएं
UL 60335 -2 3.5-4.5 Years Age Test Probe With Center Rotate Pin To Simulate Fingers Product Overview: This UL 60335-2-24 Figure 101.DVA.1 Articulated Probe 3.5-4.5 Years Age SN2210-49 is designed and manufactured meet the requirements of the standard of UL60335-2-24 Figure 101.DVA.1. It is used to ...
IEC62552 स्वचालित रेफ्रिजरेटर दरवाजा खुला और बंद परीक्षण मशीन
IEC62552 Automatic Refrigerator Door Open And Close Testing Machine Standard: Fully automatic refrigerator door open and close testing machine is designed and manufactured according to IEC62552:2015 and customer-specific requirements. It is used for the vertical door durability test of vertical ...
आईईसी 62552 4 स्टेशन स्वचालित कैबिनेट दरवाजा खुला और बंद परीक्षण मशीन
IEC 62552 4 Stations Automatic Cabinet Door Open And Close Testing Machine Standard: Fully automatic cabinet door open and close testing machine is designed and manufactured according to IEC62552:2015 and customer-specific requirements. Technical parameter No. Project Content 1 Input power source ...
आईईसी 62552 स्वनिर्धारित स्टेशन स्वचालित दराज पुश और पुल परीक्षण मशीन
IEC 62552 Customized Stations Automatic Drawer Push And Pull Testing Machine Standard: Drawer push-pull testing machine is designed and manufactured according to IEC62552: 2015 and customized requirements. It is used for the durability test of the drawer of the vertical freezer, and also used to ...
आईईसी 62552 स्वचालित फ्रिज दराज पुश और पुल परीक्षण मशीन
IEC 62552 Automatic Refrigerator Drawer Push And Pull Testing Machine Standard: Drawer push-pull testing machine is designed and manufactured according to IEC62552: 2015 and customized requirements. This equipment adopts the mature technology of PLC intelligent control, is equipped with a position...
IEC60335 सिंगल स्टेशन नकारात्मक दबाव उपकरण वैक्यूम दबाव परीक्षण प्रणाली
IEC60335 Negative Pressure Vacuum Pressure Test System For Electrical Skin Stimulators Product overview: This Negative Pressure Vacuum Pressure Test System for beauty care appliances conforms to IEC 60335-2-113: 2016. It is suitable for verifying the outlet air vacuum pressure of appliances with ...
आईईसी 60601-1 चिकित्सा विद्युत उपकरण स्थिरता परीक्षण बेंच
IEC 60601-1 Medical Electrical Equipment Stability Test Bench Applied standard and clauses: This Test Bench is required by IEC60601-1:2012 "Medical electrical equipment – Part 1:Generay requirements for basic safety and essential performance" and etc. It is suitable for the verification of whether ...
आईईसी 62262 एडजस्टेबल हाई एनर्जी पेंडुलम इम्पैक्ट टेस्ट बेंच 50J
IEC 62262 Adjustable High Energy Pendulum Impact Test Bench 50J Standards & Clauses: IEC 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements IEC 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external ...
आईईसी 60335 विद्युत इन्सुलेशन प्रदर्शन अतिप्रवाह परीक्षण उपकरण पीएलसी नियंत्रण
IEC 60335 Electrical Insulation Performance Overflow Test Apparatus PLC Control Product overview: The equipment conforms to IEC 60335-1:2004(Ed 4.1) requirements and IEC60335-2-15:2005, IEC 60335-2-14:2006 test requirements. Technical parameters: Control Mode PLC controller control, man-machine ...
IEC60950 घरेलू इलेक्ट्रॉनिक ग्राउंड बॉन्ड टेस्ट उपकरण फ्यूज 2-500mΩ
IEC60950 Household Electronic Ground Bond Test Equipment Fuse 2-500mΩ Applied standards:The electrical design meets the standard of GB4706.1, GB4943, GB7000.1, GB3883.1, and GB / T12113, as well as the international electrical committee standards such as IEC60335-1, IEC60950, IEC60598-1, IEC60745-1, ...
IEC60745 हैंड हेल्ड मोटर टूल्स कॉर्ड एंकोरेज पुल फोर्स और टॉर्क टेस्टर
IEC60745 Hand-Held Motor Tools Cord Anchorage Pull Force And Torque Tester Standards & Clauses: IEC60745-1:2006clause 24.14 GB2099.1-2008clause 23.2 GB3883.1-2008clause 24.14 GB4706.1-2005clause 25.15 GB7000.1-2015clause 5.2.10.3 GB8898-2011clause 16.5 IEC60884-1:2006clause 23.2 IEC60335-1...
IEC60335 विद्युत उपकरण परीक्षण उपकरण कॉर्ड एंकोरेज पुल फोर्स और टॉर्क टेस्ट उपकरण
IEC60335 Electrical Appliance Cord Anchorage Pull Force And Torque Test Apparatus Standards & Clauses: IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 25.15 GB2099.1-2008clause 23.2 Plugs and socket-outlets for household and similar purposes- ...
पीएलसी दो स्टेशन परिपत्र देखा स्विच और लोअर गार्ड सहनशक्ति परीक्षण उपकरण
EN 60745 Two Stations Circular Saw Switch And Lower Guard Endurance Test Equipment Product Information: This test device for circular saw switch and lower guard conforms to EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20...
EN 60745 वन स्टेशन सर्कुलर सॉ स्विच और लोअर गार्ड एंड्योरेंस टेस्ट उपकरण
EN 60745 One Stations Circular Saw Switch And Lower Guard Endurance Test Equipment Product Information: This test device for circular saw switch and lower guard conforms is used to test the circular saw switch performance and circular saw lower guard’s durability and recovery time. It conforms to EN ...
आईईसी 60335-2-2 क्लॉज 21.104 करंट कैरीइंग होसेस टोरसन रेसिस्टेंस टेस्ट इक्विपमेंट
IEC 60335-2-2 Clause 21.104 Current-Carrying Hoses Torsion Resistance Test Equipment Product Information The test equipment is designed and manufactured according to the standard requirements of IEC60335-2-2: clause 21.104 and etc. It is used for the twist test of the vacuum cleaner current-carrying ...
आईईसी 60065 क्लॉज 12.1.6 प्राकृतिक परिसंचरण एयर एजिंग ताप कक्ष 240 एल
IEC 60065 Clause 12.1.6 Natural Circulation Air Ageing Heating Chamber 240L Product Information: It is used to perform thermal aging test to polymer materials (plastics, plastics and electrical insulating materials such as: wire and cable sheathing, heat shrinkable tube, rubber test or PVC materials...
आईईसी 60335-1 अनुलग्नक एच प्लग सॉकेट - आउटलेट धीरज परीक्षण उपकरण स्विच करता है
IEC 60335-1 Annex H Plugs Socket-outlets Switches Endurance Test Equipment Product Information: The Plugs Socket-outlets Switches Endurance Test Equipment conforms to the standard requirements of IEC 60335-1 Annex H, IEC60065:2014 clause14.7 and clause 15.1, IEC 60884-1 2013 clause 20, 21, IEC 61058...
आईईसी 60068-2-75 एकल या एकाधिक ऊर्जा स्टेनलेस स्टील वसंत हैमर टेस्ट उपकरण
IEC 60068-2-75 Single or Multiple Energy Stainless Steel Spring Hammer Test Apparatus Standards & Clauses: IEC60065:2014 “Audio, video and similar electronic apparatus -Safety requirements” clause 16.5 IEC60068-2-75:2014 “Environment testing for electric and electronic products Part2: Test methods ...
IEC62262 IK07 IK10 यांत्रिक लंबवत प्रभाव परीक्षण उपकरण
IEC62262 IK07-IK10 Mechanical Vertical Impact Test Apparatus Product Introduction: The IK07-IK10 Mechanical Vertical Impact Test Apparatus is designed and manufactured according to the standard requirements of IEC60068-2-75, IEC60598-1, IEC62262 and etc. It is used for the impact resistance test of ...
आईईसी 60335-2-24 क्लॉज 15.101, 15.102 और चित्रा 1 स्पिलेज टेस्ट के लिए नमी प्रतिरोध उपकरण
IEC 60335-2-24 Refrigerating Appliances Moisture Resistance Apparatus for Spillage Test Standards & Clauses: The apparatus for spillage test is designed in accordance with IEC 60335-2-24 clause 15.101 & 15.102 and figure 101. Samples and Restrictions: Refrigerating appliances, such as refrigerators, ...
आईईसी 60227-1 क्लॉज 5.6.3.2 टिनसेल कॉर्ड बेंडिंग और स्नैच टेस्ट उपकरण
IEC 60227-1 Clause 5.6.3.2 Tinsel Cord Bending and Snatch Test Equipment Product Information: The Tinsel Cord Bending and Snatch Test Equipment is designed and manufactured according to the standard requirement of IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. It is used ...
