3 stations power supply
"
UL486A-B कंडक्टर क्षति की डिग्री परीक्षण मशीन के लिए क्षति की डिग्री की जाँच के लिए तार 2 स्टेशनों
UL486A-B Conductors Damage Degree Test Machine For Checking Damage Degree Of Wire 2 Stations Product Introductions: This conductors damage degree testing machine is also called the test apparatus for checking damage degree of wire which confirms to standards UL486A-486B and UL498 SD5.3 test method B...
एकल स्टेशन विद्युत उपकरण परीक्षण उपकरण इन्सुलेशन सतह स्क्रैच प्रतिरोध परीक्षण IEC60335-1
Electrical Appliance Insulation Surface Scratch Resistance PLC Control Test Apparatus Standards & Clauses: IEC60335-1:2016“Household and similar electrical appliances-Safety-Part1:General requirements”clause 21.2 IEC60950-1:2013“Information technology equipment-Safety-Part1:General requirement...
IEC60335 विद्युत उपकरण परीक्षण उपकरण कॉर्ड एंकोरेज पुल फोर्स और टॉर्क टेस्ट उपकरण
IEC60335 Electrical Appliance Cord Anchorage Pull Force And Torque Test Apparatus Standards & Clauses: IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 25.15 GB2099.1-2008clause 23.2 Plugs and socket-outlets for household and similar purposes- ...
तैयार लचीले केबलों के लिए IEC 60245-1 टॉरवेचर परीक्षण मशीन 1 0.33m/S
IEC60245-1 Torvature Testing Machine 1 0.33m/S For Finished Flexible Cables Technical Characteristics: Power Supply 3 phase 5 wires 220VAC/ 60 Hz or 380V/50Hz Load Current 0.5~25A, adjustable Load Voltage Line-to-line voltage 10~400V adjustable Testing speed 0.33m/s Testing distance 1000±20mm ...
आईईसी 61851-1 केबल एंकरिंग पुल फोर्स और ईवी चार्जिंग स्टेशन के परीक्षण के लिए टॉर्क परीक्षण उपकरण
IEC 61851-1 Cable Anchorage Pull Force And Torque Test Apparatus For EV Charging Station Testing Product information: It is designed and manufactured according to IEC 61851-1:2017 clause 11.6. Sample scope, purpose, principle, structure and use environment Samples and restrictions Electric vehicle ...
सिंगल स्टेशन कैरीइंग हैंडल स्ट्रेंथ टेस्ट डिवाइस IEC62368-1 एलसीडी स्क्रीन ऑपरेशन
IEC62368-1 IEC62368-1 LCD Screen Operation Single Station Carrying Handle Strength Test Device Product information: Carrying Handle Strength Test Device conform to IEC62368-1:2018 clause 8.8,IEC60601-1:2012standards. Mechanical strength of handles for audiovisual, information technology and ...
आईईसी 60529 IP5X/IP6X वॉक-इन रेत और धूल परीक्षण कक्ष 24 CBM EV चार्जिंग स्टेशन के लिए
IEC 60529 IP5X/IP6X Walk-In Sand And Dust Test Chamber 24 CBM For EV Charging Station Product Information: Standard: IEC60529:2013 "Degrees of protection provided by enclosure (IP code)" IP5X and IP6X Product features: 1. The equipment is a walk-in structure with spliced warehouse boards. There is a ...
आईईसी 61009-1 सर्किट ब्रेकर के लिए पावर लोड सप्लाई टेस्ट सिस्टम
IEC 61009-1 Power Load Supply for Circuit-breakers Test System Standards & Clauses: The test equipment conforms to the standard requirements of IEC 61009-1:2012, IEC 60898-1:2015 clause 9.11, etc. It is used to provide adjustable load voltage, current and power factor for mechanical-electrical ...
BS EN 12983-1 कुकवेयर हैंडल फेटिग टेस्टर फॉर हैंडल डिफॉर्मेशन या लूजनेस टेस्ट
BS EN 12983-1 Cookware Handle Fatigue Tester For Handle Deformation Or Looseness Test Product information: The design of the handle fatigue resistance test apparatus of cookware complies with BS EN 12983-1:2020 clause 7.6 and Appendix E. It is used to perform fatigue resistance test on cookware ...
