button control power supply
"
आईसोलेशन सतह खरोंच प्रतिरोध परीक्षण उपकरण परीक्षण घरेलू उपकरणों के लिए आईईसी 60335-1
Insulation Surface Scratch Resistance Test Apparatus For Test Household Appliances IEC 60335-1 Product information The device is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances. It conforms to the standard requirement of ...
IEC 62752 खंड 9.34 प्लग या वाहन कनेक्टर परीक्षण के लिए वाहन ड्राइव ओवर परीक्षण मशीन
IEC 62752 Clause 9.34 Vehicle Drive Over Testing Machine For Plug Or Vehicle Connector Test Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable ...
IEC 62196 वाहन परीक्षण उपकरण 5000N ड्राइव ओवर टेस्ट फॉर प्लग / ईवी कनेक्टर
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management ...
IEC 60335-1 ऑक्सीजन बम एजिंग टेस्ट चैंबर 4000cm3 स्टेनलेस स्टील एयर बम टैंक
IEC 60335-1 Oxygen Bomb (Air Bomb) Aging Test Chamber Standards & Clauses: IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 22.32 Samples and Restrictions: Wire and cable, rubber (plastic, leather) insulation and sheathing, as well as other ...
फैक्टरी निरीक्षण के लिए IEC60529 IPX7 विसर्जन परीक्षण कक्ष
IEC60529 High Quality IPX7 Immersion Test Chamber For Factory Inspection Use Product information: Standard:IEC60529 degree of protection provided by enclosures (IP Code) of the IPX7, IEC60884-1, IEC60335-1, IEC60598-1. Application:It is used for the testing of IPX7. Mainly used to test the product ...
वाहन कनेक्टर और प्लग वाहन चार्जिंग इंटरफेस के लिए यांत्रिक धीरज परीक्षण मशीन
Vehicle Connector And Plug Mechanical Endurance Test Machine For Vehicle Charging Interfaces Product information: This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to ...
बीएस एन 12983-1 खाना पकाने के बर्तनों के लीक वॉल्यूम के परीक्षण के लिए कुकवेयर डालने का परीक्षण उपकरण
BS EN 12983-1 Cookware Pouring Test Apparatus For Testing The Leakage Volume Of Cookware Product information: It is used for testing the leakage volume of water from the pouring spout of the cookware. A cookware pouring test apparatus is a specialized device used to evaluate the pouring performance ...
आईईसी 62196-3 वाहन कनेक्टर और प्लग ईवी चार्जिंग के लिए यांत्रिक धीरज परीक्षण उपकरण
IEC 62196-3 Vehicle Connector And Plug Mechanical Endurance Test Equipment For EV Charging Applied standard & clauses: IEC 62196-3: 2022 clause 22 and 23. IEC 62196-1: 2022 clause 22, 23.2, 23.3, fig 15, table 8 and table 9. Product information: This test equipment meets the requirements of IEC ...
आईईसी 61851-1 प्लग और वाहन कनेक्टर्स केबल एंकरेज पुल फोर्स और टॉर्क टेस्ट उपकरण
IEC 60309-1 Plugs And Vehicle Connectors Cable Anchorage Pull Force And Torque Test Apparatus Product information: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and ...
