logo
मिला 43 के लिए उत्पाद "

car test equipment

"
गुणवत्ता IEC 62752 खंड 9.34 प्लग या वाहन कनेक्टर परीक्षण के लिए वाहन ड्राइव ओवर परीक्षण मशीन कारखाना

IEC 62752 खंड 9.34 प्लग या वाहन कनेक्टर परीक्षण के लिए वाहन ड्राइव ओवर परीक्षण मशीन

IEC 62752 Clause 9.34 Vehicle Drive Over Testing Machine For Plug Or Vehicle Connector Test Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable ...

गुणवत्ता IEC 62196-1 इलेक्ट्रिक वाहन ग्रीन कार कनेक्टर ड्राइवओवर टेस्ट सिस्टम कारखाना

IEC 62196-1 इलेक्ट्रिक वाहन ग्रीन कार कनेक्टर ड्राइवओवर टेस्ट सिस्टम

IEC 62196-1: 2020 Vehicle Driveover Crushing Force Testing Equipment Equipment Introduction: The vehicle driveover testing machine conforms to IEC62196-1: 2020 clause 33, NB/T42077-2016 clause 9.34, etc. The test equipment is used to check whether a plug or vehicle connector shall have adequate ...

गुणवत्ता आईईसी 60529 चित्रा 2 IP5X और IP6X रेत और धूल परीक्षण कक्ष 2000L पीएलसी नियंत्रण कारखाना

आईईसी 60529 चित्रा 2 IP5X और IP6X रेत और धूल परीक्षण कक्ष 2000L पीएलसी नियंत्रण

IEC 60529 Fig 2 IP5X And IP6X Sand And Dust Test Chamber 2000L PLC Control Product information: The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to ...

गुणवत्ता IP5X IP6X रेत और धूल पर्यावरण परीक्षण कक्ष 2000L IEC 60335-1 परीक्षण इलेक्ट्रिकल के लिए कारखाना

IP5X IP6X रेत और धूल पर्यावरण परीक्षण कक्ष 2000L IEC 60335-1 परीक्षण इलेक्ट्रिकल के लिए

IEC 60335-1 IP5X/IP6X Sand And Dust Environmental Test Chamber 2000L For Test Electrical Equipment Information For IP5X/IP6X Sand And Dust Environmental Test Chamber: The P5X/6X Sand and Dust Test Chamber is a specialized testing equipment used to simulate sand and dust environments for evaluating ...

गुणवत्ता 20V 200A कार लीड एसिड भंडारण बैटरी के लिए निर्वहन क्षमता बैटरी परीक्षण उपकरण कारखाना

20V 200A कार लीड एसिड भंडारण बैटरी के लिए निर्वहन क्षमता बैटरी परीक्षण उपकरण

20V 200A Car Lead-Acid Storage Batteries Charge Discharge Capacity Life Cycle Testing Equipment Overview: This battery charge discharge testing equipment meets the requirements of power battery pulse charge and discharge test, DC internal resistance (DCIR) test, cycle life (Cycle Life) test, rate ...

गुणवत्ता IEC60529 स्टेनलेस स्टील रेत और धूल परीक्षण कक्ष कारखाना

IEC60529 स्टेनलेस स्टील रेत और धूल परीक्षण कक्ष

IEC60529 Stainless Steel High Quality Sand And Dust Test Chamber Product information: The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the ...

गुणवत्ता IP5X और IP6X रेत धूल परीक्षण कक्ष के लिए संलग्नक सील प्रदर्शन परीक्षण IEC 60529 कारखाना

IP5X और IP6X रेत धूल परीक्षण कक्ष के लिए संलग्नक सील प्रदर्शन परीक्षण IEC 60529

IP5X & IP6X Sand Dust Test Chamber For Enclosure Sealing Performance Test IEC 60529 Product information: The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In ...

गुणवत्ता IEC 62368-1 क्लॉज Y.5.5 ब्लोइंग सैंड एंड डस्ट टेस्ट चैंबर 1000L कारखाना

IEC 62368-1 क्लॉज Y.5.5 ब्लोइंग सैंड एंड डस्ट टेस्ट चैंबर 1000L

IEC 62368-1 Clause Y.5.5 Blowing Sand and Dust Test Chamber 1000L Product information: Blowing Sand and Dust Test Chamber is designed and manufactured according to IEC60529 Fig 2, required by IEC 62368-1:2018 clause Y.5.5, IEC 60335-1 clause 21, IEC60598-1-2008, IEC60335-1 Clause 22.1 and etc. The ...

गुणवत्ता आईईसी 60309-1 चित्र 7 ग्रीन कार सहायक उपकरण यांत्रिक शक्ति प्रभाव परीक्षण उपकरण Test कारखाना

आईईसी 60309-1 चित्र 7 ग्रीन कार सहायक उपकरण यांत्रिक शक्ति प्रभाव परीक्षण उपकरण Test

IEC60309-1 Green Car Accessories Mechanical Strength Impact Test Apparatus Equipment Introduction:The test equipment is designed and manufactured according to IEC60309-1: 2012 clause 24.2 and figure 7, etc. It is used to verify the mechanical strength of the vehicle plugs, socket-outlets and ...